Kalorik VC 42475 Manual Del Usuario página 8

Aspirador ciclónico recargable con cepillo potente
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2. Charge on base
Place the base on a flat, horizontal, stable surface that is not
exposed to direct sunlight or humidity, and far from any heat
source.
Remove the rubber cover on the base to access the charging pins
on top of the charging station.
Make sure the appliance is set to off, and all the accessories are
removed.
Plug the charger into the side of the base, and then plug it into a
wall socket.
Place the battery into the charging base, making sure that the
connection pins on the base are straight and not crooked. The
battery should insert perfectly into the base
The LED light on the base lights up red, and will start blinking, to
show that the battery is charging.
When the battery is fully charged, the LED indicator light should
glow solid red (it will no longer blink).
Note: To remove the battery from the base, simply press the 2 buttons
on each side of the battery and lift it out from its cradle.
Note: We recommend keeping your appliance always in charge when
not in use, this way it will keep a full charge and will always be ready for
use when you need it.
Important: The charger and its cord cannot be repaired. Should they
be damaged, they must be discarded. Contact customer service to
replace them.
www.KALORIK.com
8
VC 42475 - 170629

Publicidad

Tabla de contenido
loading

Tabla de contenido