Panacom S113 STAGE SOUND Manual Del Usuario página 5

POWER SOURCE
1. Please charge the unit at least 4 hours before first time using.
2. Long press the POWER/INPUT button on the panel to switch on or off the speaker.
CHARGE THE BATTERY
When the battery is charging, the CHARGE STATUS lights red. When the battery is fully
charged, the light turns to green.
1. Connect on end pf the AC adaptor to the DC IN JACK of the speaker, and plug the other end
of the AC adaptor into a wall outlet.
2. When the battery is fully charged, first unplug the AC adaptor from the speaker, then unplug
the AC adaptor from the wall outlet.
3. The speaker works normally when charging.
POWER/INPUT BUTTON
Press POWER/INPUT button on the front panel to select the mode (LINE,USB,BT).
REPEAT FUNCTION
1. Press the REPEAT button to repeat the track that is currently being played. Press the
REPEAT button again to cancel.
2. The REPEAT function is available only for USB card playing mode.
RECORDER FUNCTION
Recording: Insert USB card, plug in microphone, long press REPEAT button on the front panel,
then the machine displays "REC" to start recording, short press the REPEAT button to stop
recording and play the recording automatically, press POWER/INPUT to return to USB card
playing state.
Play the recording: Insert USB card, long press
button to select recording file.
PREVIOUS/NEXT BUTTON
By pressing PREVIOUS/NEXT button you can select a specific song from the playlist.
PAUSE/PLAY BUTTON
Press the PAUSE/PLAY button to play or pause the audio.
VOLUME ADJUSTMENT
Twist the dial anticlockwise to decrease the volume and clockwise to increase the volume.
MIC IN JACK
Plug in microphone directly for playing.
USB JACK
Insert USB card directly for palying
LINE IN JACK
1. Connect one end of the audio cable (not included) to the LINE IN JACK of the speaker and
the other end to an external audio device.
2. Press the POWER/INPUT button to access LINE mode and start playing from an external
audio device.
to play the recording file and press Or
Pg. 5