Set-Up Instructions - Qwest CID98-LS Manual De Instrucciones

S E T - U P I N S T R U C T I O N S
PHONE
(ENLARGED TO SHOW
S t e p 1
Connect the phone cords. Then connect the power adapter.
Note: Do not plug the power adapter into a wall outlet that is controlled
by a wall switch.
For diagram showing two-line installation, see p. 7
For diagram showing installation with an answering machine, see p. 8
For instructions on wall mounting, see p. 12
ID UNIT OUTLET
BACK PANEL)
PHONE TEL LINE 9V DC
2
S t e p 2
To select the language (English or Español):
JACK
a) Press and hold the DIAL key while pressing the left REVIEW key
to see the selections.
b) Release the DIAL key to confirm the setting.
S t e p 3
The Call Waiting ID unit can dial numbers for you that appear in the display.
To help you dial, the unit needs to be set for your local dialing rules. Do
you dial local calls using seven digits, or in your area are you required to
dial ten digits?
a) Press and hold the DIAL key while pressing the right REVIEW key
to see the selections.
b) Release the DIAL key to confirm the setting.
3