Logitech CC3000e Guide D’installation página 5

Set up your product
1. Set up camera on table, or using mount
on table or wall.
2. Connect cable to speakerphone and
camera (refer to diagram above).
a. Attach Cable Lock to cable.
b. Plug Cable Lock into the slot of
the housing.
c. Rotate the Cable Lock clockwise
to lock the cable.
3. Connect to external power. The LCD will
turn on and display the Logitech logo
when receiving power.
Logitech ConferenceCam CC3000e
a
4. To start a call from your PC or Mac
application, connect the USB cable
from the hub to your USB port.
The speakerphone LCD will also
prompt you to connect. The camera
and speakerphone LEDs will flash to
show that connection is taking place,
and when completed, the camera
head will rotate and the speakerphone
will play a sound. If these activities
do not take place, try again and
then consult Troubleshooting or call
technical support.
b c
English 5