Guarantee & Service; Guarantee Restrictions - Hapro MOBILE SUN Manual De Instrucciones

Replacement
The light that the tanning lamps emit becomes less bright in time (i.e. after a few years in case
of normal use). When this happens, you notice a decrease in the tanning capacity of the
appliance. You can solve this problem by setting a slightly longer tanning time or by having
the tanning lamps replaced.
The UV filter protects against exposure to undesired UV light. It is therefore important to have
a damaged or broken filter replaced right away.
Have the tanning lamps, the UV filter and the mains cord replaced by a dealer or service
centre authorised by Hapro. Only they have the knowledge and skills required for this job
and the original spare parts for the appliance.
Environment
- The lamps of the appliance contain substances that can be harmful to the environment.
When you discard the lamps, do not throw them away with the normal household waste
but hand them in at an official collection point.
- Do not throw away the appliance with the normal household waste at the end of its life,
but hand it in at an official collection point for recycling. By doing this, you help to preserve
the environment (Fig. 22).
Guarantee & service
All defects resulting from material or production faults and which occur within the warranty
period, will be repaired free of charge on production of the original sales invoice. The warranty
period is 24 months. For warranty queries, please contact your dealer.
Your new tanning appliance is intended for domestic use and not for commercial purposes.
Damage as a result of commercial use, as well as tubes, starters, protective supports and acrylic
panels, are not covered by the Hapro warranty.
Malfunctioning as a result of assembly and or installation faults, improper use, lightning
damage and non-original parts are excluded from the Hapro warranty.
Check carefully if the equipment has been installed properly before claiming under the
warranty. In case of an unwarranted claim, you will be charged service costs.

Guarantee restrictions

The terms of the international guarantee do not cover the tanning lamps.
Troubleshooting
If problems should arise with this appliance and you are unable to solve them by means of the
information below, please contact the nearest Hapro dealer..
Problem
The appliance does not
work.
Solution
The lamp unit may not be in the right position (see chapter
'Preparing for use' . Put the lamp unit in the right position.
The plug may not be inserted properly in the wall socket.Put the
plug properly in the wall socket.
ENGLISH
9