Troubleshooting
Problem
No picture
Screen shows
No Signal
No sound from
speaker
Only sound,
no image on the
screen
Remote control
unit is not workable
The image stop
suddenly or mosaic
Potential Reasons
Power isn't connected
The power switch is not on
Not connect DVB-T cabl
Incorrect setting
No or incorrect connection
with audio cable
Mute the sound
Incorrect sound track
No or incorrect connection
with AV cable
The program is a radio
program
The battery is exhausted
Remote control unit is not
in the right opposite of the
front panel or too far from it
The signal is too weak
14
What to do
Connect the power
Switch on the power
Plug in the DVB-T cable
Set up correct parameter
Connect the audio cable
correctly
Switch on the correct
volume control
Try another sound track
Connect the audio cable
correctly
Press <TV/RADIO> key to
shift into TV mode
Change new battery
Adjust the way of holding
remote control unit and
near from the panel
Strengthen the signal