Steam Ironing; Vertical Steam - Grundig SIS 8670 Manual De Instrucciones

Ocultar thumbs Ver también para SIS 8670:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46
OPERATION ______________________________
Steam ironing
1
Fill the water reservoir
2
Place the appliance on the steam station
surface
.
G
1
3
Plug in the appliance.
You will hear a beeping sound when the
appliance starts to operate.
Control panel
J
off.
4
Press the on/off button
Note
Operation of the pump may make some noise
during the water drawing process; this is
normal.
The appliance starts in Smart-ECO mode in
the initial use. This level offers safe temperature
and steam amount for all the fabrics that can
be ironed.
5
You can set temperature levels other than the
Smart - ECO mode by using the control button
.
K
Warning
Your selection should be suited for the fabric
to be ironed.
6
When the symbol of the selected setting flas-
hes consistently on the display, your applian-
ce is ready to iron.
Warning
If the symbol on the display blinks, this means
that the soleplate temperature setting is not at
the desired level.
with water.
E
2
flashes once and then goes
.
K
Note
You can do steam ironing by using the steam
trigger
at all temperature levels except for
L
"•".
7
When the appliance is ready for steam iro-
ning, move the iron horizontally on the fabric
to be ironed and press the steam trigger
Your iron will raise steam from its soleplate
as long as you hold the steam trigger pressed.
8
When the ironing process is over, press the
on/off button
for a few seconds.
K
The lights on the control panel
9
Unplug the appliance and leave it to cool.
Vertical steam
You can also use the steam in upright position.
You can iron your curtains and hanged garments
thanks to the vertical steam feature. Keep the
appliance 15-30 cm way from the garment and
curtains..
Warning
Never direct the steam to people or pets.
L
H
will go off.
J
ENGLISH
27
.

Publicidad

Tabla de contenido
loading

Tabla de contenido