Communication - IME CONTO D2 Manual De Instrucciones

63A single-phase energy meter,
MID direct connection

9. COMMUNICATION

RS485 Modbus wiring diagram:
IF4E011/SXIIP
ETHERNET
RJ45
RS485 Modbus wiring diagram with Mini Web Server:
3
RS485: Required use of Belden 9842 or Belden 3106A wire (or equivalent) for a maximum bus length of 1000 m, or Category 6 wire
(1)
(FTP or UTP) for a maximum length of 50 m
120Ω terminating resistor inside the instrument (it can be set in the SETUP menu)
(2)
Ethernet: Cat. 6 (FTP/UTP)
(3)
Communication tables
- The MODBUS and MBUS communication protocols are available on the
"CE2DF3DTMID / CE2DF3MTMID" in the search field.
Technical data sheet: IDP000193EN_01
RS-485
+ – SG
(3)
SXWS10/SXWS32
RS-485
+ – SG
Codes: CE2DF30PMID – CE2DF3DTMID – CE2DF3MTMID
Model: CONTO D2
CE2DF3.....
N°1
+ – SG
CE2DF3.....
N°1
+ – SG
http://www.imeitaly.com,
Updated: -
CE2DF3.....
N°2
+ – SG
CE2DF3..... CE2DF3.....
N°2
+ – SG + – SG
site, entering the codes:
Created: 18/03/2019
CE2DF3.....
N°n
+ – SG
N°n
7 | 7