HP 10/100 3Com 3C905B-TX Guia De Instalacion página 16

HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide
Software Installation Procedure
Installing the Driver
Follow these steps to install the network driver in a PC running
Windows NT version 4.0:
1 Restart the PC and start Windows NT.
2 In the
Control Panel
3 In the window, click on the
Network
4 In the
Select Network Component Type
and then click on the
5 In the
Select Network adapters
6 Insert EtherDisk diskette #2 in drive A, and in the
click on OK.
7 In the Select OEM Option box, select 3Com EtherLink Adapter
(3C905B).
8 Click on OK.
9 Select the
Protocol
10 Select the appropriate protocol for your network and click on OK.
11 Close the
Network
If you are prompted for network information, enter the information
supplied by your MIS department.
Windows NT prompts you to reboot.
12 Click on Yes to restart your PC.
The driver installation is complete.
To confirm successful installation, double-click on the
the . Double click on the Adapter item. 3Com
Control Panel
EtherLink XL Adapter should appear in the Network
Adapters list.
12 English
, double-click on
Network
Add...
window, select the Adapter item
button.
Add...
window, click on the
tab.
window.
.
button.
button.
Have Disk...
window,
Insert Disk
Network
icon in