Remote Control; Power Supply; General Operation - Sanyo MCD-UB685M Instruction Manual

REMOTE CONTROL

Controls (Fig. 3)
1. Play/Pause button (i)
2. Stop button (n)
3. CD function button (CD)
4. Repeat/Random button
(REPEAT/RANDOM)
5. USB / SD function button
(USB/SD)
6. Batteries compartment (back of the unit)
7. Skip/Search/File select buttons
(f /FILE-, SKIP/SEARCH, FILE+/ e)
8. Memory/Folder select button
(MEMORY/FOLDER)
Inserting batteries (Fig. 4)
Install two "AAA/R03" batteries (not supplied).
Note:
Always remove batteries if the remote controller
is not to be used for a month or more. Batteries
left in it may leak and cause damage.
Remote control range (Fig. 5)
The buttons on the remote controller perform
similar function to similarly marked buttons on
the mains unit.

POWER SUPPLY

AC Power
Connect one end of the mains lead to the AC
INPUT ~ socket and the other end to an AC outlet.
Note:
- The installed batteries are automati-
cally disconnected when the mains lead is
connected to the unit.
- The FUNCTION switch is mounted on
the secondary side. The unit is not discon-
nected from mains, even switched off.
Battery power
Installing batteries
Install eight "D/R20" batteries (not supplied) as
shown in Fig. 2.
9
685XEEn.indd 9
Caution on batteries
To prevent battery electrolyte leakage, which may
result in injury and damage to the unit or other
objects, observe the following precautions:
1. All batteries must be installed with the proper
polarity (see diagram on the rear of the unit).
2. Do not mix new with old or used batteries.
3. Only use batteries of the same type and
brand.
4. Remove the batteries when they are not to be
used for a long period time.
5. When the batteries have become discharged,
they must be disposed of in a safe manner
which complies with all applicable laws.
6. Battery shall not be exposed to excessive heat
such as sunshine, fire or the like.

GENERAL OPERATION

Adjusting the volume
Turn the VOLUME control.
Bass expander button
Press the BASSXPANDER button to Z ON to
enhance the bass sound.
Surround sound button
Press the SURROUND button to Z ON, a 3 di-
mensional sound effect is created.
Headphones
Connect stereo headphones (not supplied) to the
PHONES socket for monitoring or for private
listening. The speakers are automatically
disconnected when headphones are connected.
- Excessive sound pressure from earphones
and headphones can cause hearing loss.
2008.7.23 8:39:14 AM