GREENBLUE GB107 Guia De Inicio Rapido página 2

2.TIMER PROGRAM SETTING:
1).Press "PROG" button, it will enter into timer program setting mode, you can set 16
groups ON and OFF timer program.
2).Press "SET" button for setting 1st program ON time, the triangle before "HOURS"
will blink, then press "UP" button to set the hours.
3).After finishing "HOURS" setting, pls press "SET" button again, the triangle before
"MINUTES" will blink, then press "UP" button to set the minutes.
4).After finishing "MINUTES" setting, press "SET" button once more, the triangle before
"WEEKS"will blink, then press "UP" button to set the week, it will take turns to show:
MO→TU→WE→TH→FR→SA→SU→MO TU WE TH FR→SA SU→MO TU WE TH FR
SA→MO WE FR→TU TH SA→MO TU WE→TH FR SA→MO TU WE TH FR SA SU.
Choose the date you want.
5).After finishing above all operation, pls press "PROG" button to enter into 1st program
OFF time setting. If you wanna set next group program ON and OFF time, pls continue
to press "PROG" button, and do as above operation.
6).In clock time mode, press the "SET" button to select "AUTO", "OFF" or "ON" mode.
The modes are displayed in the following order.
→AUTO (Power switched off. Timer activated)
→ OFF (Power switched off at all times. Timer deactivated)
→ ON (Power switched on at all times. Timer deactivated)
7).If you want to cancel set timer program, pls press "PROG" button to selected that
one, and then press "CLEAR" button for canceling.
3. RANDOM FUNCTION:
1).Random function is only activated from PM6:00 to AM6:00,If you want start this
function, and you also need to choose the AUTO mode.
2).After finishing above operation, pls press "SET" and "UP" button at the same time,
Random function will be activated.
3).If you want to cancel Random function, pls press "SET" and "UP" button at the same
time, then the letters "RANDOM" on LCD will disappear.
4.COUNTDOWN TIME FUNCTION:
1).Countdown time function only works in "ON" or "OFF" mode, and random function
should be turned off.
2).After finishing above operation, pls press "UP" and "PROG" button at the same time,
and it will enter into countdown time setting mode.
3).Press "SET" button, the triangle before "HOURS" will blink, then press "UP" button to
set the hours (0-99).
4).After finishing "HOURS" setting, pls press "SET" button again, the triangle before
"MINUTES" will blink, then press "UP" button to set the minutes(0-59).
5).After finishing above all operation, pls press "OK" button to enter into countdown
time mode.
6).If you want to cancel countdown time function, pls press "UP" and "PROG' at the same
time, the letters"COUNTDOWN" on LCD will disappear, and then it will return to clock
mode.
5.REMARK:
1).If there is an abnormal display appears or the buttons have no response, pls press
"RESET"button for recovering.
2).If built-in batteries are in low power, after plugging timer into 230VAC power supply,
if it still don't work, user needs to press "RESET"button for recovering.
6. TECHNICAL PARAMETERS:
Voltage: 230V~50HZ Working temperature: 0-50°C
Voltage Frequency:45-65HZ Timer range:1minute-168hours (7days)
Max load current: 16A Timer error: <1minute/month
Max load power: 3680W
7. EXCEPTION ANALYSIS:
1. Please check whether timer and power supply is in good connection.
2. Please check whether timer and electric appliance is in good connection.
3. Please check whether timer is in correct working mode.
WARNING: Only to be used indoor. Only to be used in dry conditions.
Only to be used within max load.
PL TIMER CYFROWY 16 PROGRAMÓW
OPIS PRODUKTU
Funkcja: włączenia/wyłączenia urządzenia może zaoszczędzić twój czas i pieniądze.
Stosowany w sprzęcie RTV, komputerach, klimatyzacjach, kotłach CO, kuchenkach
elektrycznych, dozownikach wody, podgrzewaczach, telefonach, podczas ładowania
akumulatorów.
PIERWSZE URUCHOMIENIE
Otwórz opakowanie i podłącz urządzenie do programatora, następnie podłącz timer
do zasilania. Timer zacznie działać. Na wyświetlaczu na około 3s wyświetlą się wszystkie
symbole (jak na ilustracji), następnie programator przejdzie do trybu użytkowania.
1.USTAWIENIE CZASU:
1). Wciśnięcie przycisku "CLOCK" na 3 sekundy spowoduje wejście w tryb ustawień
zegara. Naciśnij przycisk „SET" na wyświetlaczu pojawi się selektor (symbol trójkąta).
Naciśnij UP aby ustawić godzinę (zakres od 0-24 godzin).
2). Naciśnij przycisk „SET" ponownie, selektor ustawi się przed minutami.