NUTOOL NTC180 Manual De Instrucciones página 15

GB
Electrical information 5Amp Class 1 Protection
CONNECTION OF THE MAINS PLUG
Important! The wires in the mains lead fitted to this product are coloured in accordance with the following
code:
If for any reason the 13 amp plug fitted to this product requires replacing it must be wired in accordance
with the following instruction:
Do not connect the brown live or blue neutral to the earth pin MARKED E
on the 3 pin plug.
Connect the Blue wire to the terminal marked Neutral (N). Connect the Brown wire to the terminal marked
Live (L). Connect the Green and Yellow wire to the terminal marked Earth E.
insulation is gripped by the cord grip and that the wires are not trapped when replacing the plug cover. The
mains lead on this product is fitted with a 13 amp (BS1363/A) plug. A 5 amp (BS1362) fuse must be fitted in
the plug. If in doubt consult a qualified electrician.
There are no user serviceable parts inside this product except those referred to in the manual. Always refer
servicing to qualified service personnel. Never remove any part of the casing unless qualified to do so; this
unit contains dangerous voltages.
WARNING!
For your protection if this tool is to be used outdoors, do not expose it to rain or use it in damp locations. Do
not place the tool on damp surfaces, use a workbench if available. For added protection use a suitable
residual current device (R.C.D.) at the socket outlet.
If an extension cable is to be used with this machine it must be of 3 core construction with the earth
conductor connected at both the plug and socket. If in doubt consult a qualified electrician.
Brown: Live (L) or Red
Blue: Neutral (N) or Black
Green and Yellow or Green: Earth (E)
THIS PRODUCT REQUIRES A CONNECTION TO
EARTH. THE 3 PIN PLUG MUST COMPLY TO BS1363/
A. The FUSE MUST COMPLY TO BS1362.
10
15
Ensure that the outer
GB