YP3040 Installation Guide
YP3040 Installation Guide
This installation guide provides instructions for installing the YP3040 Pan-Tilt Motor.
Installation steps
1. Check the package contents against the list below.
2. Hardware overview. See page 4.
3. Install the hardware.
•
Install the wall bracket, see page 5.
•
Install the Pan-Tilt motor, see page 5.
•
Install the camera in the housing, see page 5.
•
Install the housing on the Pan-Tilt motor, see page 5.
•
Connect the cables, see page 6.
4. Setup, see page 7.
Package contents
Item
Pan-Tilt Motor
Mounting kit
Printed materials
Optional accessories
Recommended Accessories
Item
YP3040 Wall Bracket
AXIS T92A20 Housing
AXIS PS24 Mains Adaptor
Models/variants/notes
YP3040
2 screws M5x10 for mounting the camera housing on the splint
4 bolts for mounting the pan-tilt motor on the recommended wall bracket
1 allen key
YP3040 Installation Guide (this document)
Drill template
Axis Warranty Document
See www.axis.com for information on product documentation, installation
tools, cameras, power accessories, and housings
Models/variants/notes
Wall bracket for YP3040 Pan-Tilt Motor
Housing to be mounted on YP3040 Pan-Tilt Motor
Power supply input 100—230 V AC, suitable for indoor and outdoor use
Important!
This product must be used in
compliance with local laws and
regulations.
Page 3