Kaiser slimlite plano Serie Instrucciones página 6

ENGLISH
①
ON/OFF and brightness control touch switch
②
Micro-USB socket
③
Standby (red) and charging indicator (orange)
④
Mode switch USB/battery operation
⑤
Light box
⑥
cm scales
⑦
Illuminated area
⑧
inch scales
⑨
Mains/charging adapter
⑩
USB cable
Prior to using your light box, please read these instructions carefully.
Keep them safe to have them at hand at any time. If you pass the
light box on to somebody else, always include these instructions.
1. Intended use
The "slimlite plano" LED light box is intended to be used primarily
for transillumination of transparent originals (like slides or foils for
example). It is not intended for household lighting.
Use this light box only as described in these instructions. Any other
use has to be considered as not as intended and can result in ma-
terial damage or physical injury. This light box is not a toy.
Kaiser takes no responsibility for damages caused by not intended
or incorrect use.
2. Safety instructions
Please observe the following safety instructions:
6
WARNING!
Disconnect the devices (light box, mains/charging adapter, USB
cable) from mains before cleaning and maintenance.
Keep the products away from children.
Do not put the devices into operation, if housing, plugs or cables
are damaged.
Do not disassemble or modify the products. Repairs must only be
carried out by qualified persons.
CAUTION!
Only use the light box with parts designed for it.
Use the devices only in dry rooms.
Keep the devices away from water and other liquids and from com-
bustible materials.
To avoid deep discharge of the battery, the light box must not be
stored in an uncharged condition. If you do not use the light box for
a longer period of time, the battery has to be recharged every
6 months.
Do not use or store the devices at places with extremely high air
humidity or at extremely hot places. Keep the devices away from
direct solar radiation.
Prior to boxing the light box, switch it off completely (see section 4
below) and let all devices cool down.
Do not place metal parts or subjects with sharp edges on the sur-
face of the light box to avoid scratches.
3. Check devices and scope of supply
When unpacking the devices for the first time, please check if the
scope of supply is complete. It comprises
⑤
Light box
⑨
Mains/charging adapter
⑩
USB cable