Operation Panel Components - HP 104in Guia Del Usuario

Operation panel components

1. Display panel:
●
Indicates the remaining time on the timer.
●
Press Timer buttons (5) up or down to set the timer (from the minimum one hour to maximum
24 hours).
2. Power button:
●
Turns the dryer on or off.
●
If the Power button is turned off while the heater is operating, the fan continues to operate for
three more minutes before the dryer eventually turns off.
3. Fan button: When switched on, air is blown out of the dryer.
4. Heater button: When switched on, warm air is blown out of the dryer.
5. Timer button:
●
Sets the timer.
●
Operation up to 24 hours can be set (the remaining time is indicated on the display panel).
●
The default value at the first power on is 10 hours.
6. Air Flow button:
●
Changes air flow of the fan and heater.
●
The air flow can be changed to High (H), Medium (M) or Low (L).
●
The default value at the first power on is High (H).
7. Fan lamp: This is lit while the fan is operating.
8. Heater lamp: This is lit while the heater is on.
12 Chapter 4 Dryer components ENWW