Axis S10 Serie Guia De Instalacion página 12

AXIS Camera Station S10 Recorder Series
For more information, see the built-in help and AXIS Camera Station User Manual available
at www.axis.com
Get Started with AXIS Camera Station - S9001 Mk II / S9002
Start AXIS Camera Station Client and the wizard "Get Started with AXIS Camera Station" start
automatically. "Get Started with AXIS Camera Station" provides a quick way to add cameras and
to configure and enable recording:
Note
Make sure that AXIS Camera Station server is running on AXIS S1016 Mk II /
AXIS S1032 Mk II / AXIS S1048 Mk II Recorder before you follow the steps below.
1. Connect to the S10 Recorder.
2. Select cameras and video encoders to add.
3. Select recording methods and where to store recordings.
4. Review settings and click Finish to add cameras and start recording or viewing with
AXIS Camera Station.
For more information, see the built-in help and AXIS Camera Station User Manual available
at www.axis.com
Specification
Note
Offerings may vary by region. The following specifications are only those required by law to ship
with your computer. For more information regarding the configuration of your computer, click Start
> Help and Support and select the option to view information about your computer
Power
Voltage
Coin-cell battery
Wattage
Maximum heat dissipation
Note
Heat dissipation is calculated by using the power supply wattage rating.
Physical
AXIS S1016 Mk II/AXIS S9002
100 V AC to 240 V AC
3 V CR2032 lithium coin cell
365 W
1245 BTU/hr
12
AXIS S9001 Mk II
100 V AC to 240 V AC
3 V CR2032 lithium coin cell
315 W
1075 BTU/hr