Amplicom AB 900 Guia Del Usuario página 18

R
EMOTE ACCESS
is answered by the machine (approximately ten
rings).
2. After the tone, enter the remote access authorization
code on the telephone. Two signal tones con rm that
the correct code has been entered.
3. Press 9 # and the answering machine will be turned on.
4. Hang up the call or make use of the other remote
access functions.
Remote access with insuf cient memory
capacity
If there is no memory left for new messages, the
answering machine will no longer accept calls. To access
messages remotely in this case, proceed as follows:
1. Call the telephone number associated with the
answering machine.
2. Let the phone ring approximately ten times and the
answering machine will respond with several signal
tones.
3. Enter the remote access authorization code. Two signal
tones con rm that the correct code has been entered.
Remote access functionality is now available (see
Remote access functions).
4. Create more memory space by deleting messages.
18
Service Center