Keys Function; Operation; Unit Weight Selection - Gram D3 Serie Manual De Utilización

KEYS FUNCTION

To calibrate the scale.
To select function as weighing, counting, percentum.
To choose the unit weight: kg, lb.
Function 1. To set high and low limits range in limits function.
Function 2. To set sample in counting and perce ntum functions.
Function 1. To make display to zero when there´s nothing on the weighing
pan but the display is not at zero.
Function 2. Press this key countinuously for 2-4 seconds to switch on or
switch off the backlight.
To tare a container and get the net weight of the product.
To input numbers in setting mode.
To confirm data in setting mode.

OPERATION

The balance must be placed on a stable and flat surface, adjust it using its four feet,
put the weighing pan and then switch on the power. The scale will go into weighing
mode after the self checking. The indicators of Zero and Kg will light on. You may
press key to select the desired function: weighing, counting, percentum.

UNIT WEIGHT SELECTION

Press the key to select the desired unit weight: "kg" or "lb"
7