Reducing The Risk Of Injury; Risks Of Using Flash&Go - Home Skinovations Silk’n Flash&Go Manual Del Usuario

Never use flammable liquids such as alcohol (including perfumes, sanitizers, or other applications containing
alcohol) or acetone to clean the skin before using Flash&Go™.
Use of Flash&Go™ may cause temporary pigmentation changes (See section 8 -"Risks of Using Flash&Go™").
Keep this device out of the reach of children. Do not use Flash&Go™ on children or allow children to use it.

7. Reducing the risk of injury

As with any electrical device, certain precautions must be taken in order to ensure your safety when
using Flash&Go™.
No modification of this equipment is allowed!
Keep Flash&Go™ away from water!
Flash&Go™ is an electrical device. As such it should always be kept away from water.
Do not place or store Flash&Go™ where it can fall or be pushed into a tub, sink or any other vessel contain-
ing water. Do not place in, or drop into water or any other liquid.
This may cause severe electrocution.
Do not use Flash&Go™ while bathing.
Do not use Flash&Go™ if it becomes damp or wet.
Do not reach for Flash&Go™ if it has fallen into water.
Unplug Flash&Go™ immediately if it has fallen into water.
Keep Flash&Go™ away from water! Unplug Flash&Go™ immediately if it has fallen into water.
Never open Flash&Go™!
Do not attempt to open or repair your Flash&Go™ device. Opening Flash&Go™ may expose you to
dangerous electrical components and to pulsed light energy, either of which may cause bodily damage and/
or eye injury.
8
Do not attempt to open or repair your Flash&Go™ device. Only authorized
Flash&Go™ repair centers are permitted to perform repairs.
Trying to open Flash&Go™ may also damage the device and will void your warranty.
Please contact Flash&Go™ Customer Service if you have a broken or damaged device in need of repair.
Use Flash&Go™ only for its intended use and as described in its manual.
Flash&Go™ should never be left unattended when plugged into an outlet.
Do not operate Flash&Go™ if it has a damaged cord or plug and keep the power cord away from heated
surfaces.
Do not use Flash&Go™ if you see or smell smoke when it is in use.
Do not use Flash&Go™ if it is not working properly or if it appears damaged.
Do not use Flash&Go™ if the fan vent in its treatment surface is cracked, coming off or missing.
Do not use Flash&Go™ if the Skin Color Sensor is cracked, or broken.
Do not use Flash&Go™ if the outer shell is cracked or coming apart.
Always unplug Flash&Go™ from the electrical outlet immediately after use.
Unplug Flash&Go™ before cleaning.
Do not use Flash&Go™ with any attachments or accessories not recommended by Home Skinovations Ltd.
Flash&Go™ must be operated only with its designated adaptor (for details on the right adaptor to use
please see chapter 14 – "Specifications")
8. Risks of using Flash&Go™
Side effects and complications associated with the use of Flash&Go™ according to its instructions are
uncommon. However every cosmetic procedure, including those designed for home use, involves some degree
of risk. Therefore it is important that you understand and accept the risks and complications that can occur with
pulsed light hair removal systems designed for home use.
9