Features - Honeywell VISIOCAM RCWL8000A Instalación Y Uso

Features

DOOR CAMERA FEATURES
INFRARED LEDS
– ALLOWS THE CAMERA
TO 'SEE IN THE DARK' IN
MONOCHROME
CAMERA LENS
– VIEWS CALLERS
CONFIDENCE LIGHT
– ILLUMINATES WHEN
CALL BUTTON IS
PRESSED TO
REASSURE THE
CALLER THAT THE
UNIT IS WORKING
LIGHT SENSOR
– DETECTS AMBIENT LIGHTING AND
SWITCHES CAMERA FROM COLOR
TO MONOCHROME IN LOW LIGHT
Pre-installation setup
Before fixing the door camera in place, set up and test the system as follows:
Install the batteries in the door camera
Note: The door camera has a built
in tamper switch to help prevent
theft. Once the batteries have been
inserted, the confidence light flashes
and the tamper alert sounds on the
receiver.
1. Remove the two screws at the
base of the camera unit and
unhook and release the camera
base, pulling it away from the
lower end first.
69-2108EFS_A.indd 1
CAMERA BASE
– REMOVES FOR
WALL MOUNTING
MOVEMENT SENSOR
(PIR)
CALL BUTTON
– ACTIVATES THE
CHIME TUNE
AND CAMERA
NAME PLATE
– FOR DISPLAYING YOUR
NAME OR OTHER INFORMATION
RECEIVER FEATURES
DISPLAY
– SCREENS THE CAMERA
IMAGE FOR APPROX. 30
SECONDS AFTER THE CALL
BUTTON IS PRESSED
TUNE SELECTION
BUTTON
– SELECTS THE
CHIME TUNE FOR
THE DOOR CAMERA
TUNE SELECTION
BUTTON
– FOR SECOND
CAMERA/PUSH
RCA SOCKET
– TO CONNECT TO
A TV SET (OPTIONAL)
CHIME FLASHER
BATTERY INDICATOR
3
1 2
1
VISIOCAM
ANTENNA
– RECEIVES THE
SIGNAL FROM
THE CAMERA
MIC VOLUME
– FOR FUTURE USE
DISPLAY
Scan
BRIGHTNESS
CHIME
VOLUME
SCAN BUTTON
– LOOKS FOR
CONNECTED
CCTV-TYPE CAMERAS
NAMEPLATE
69-2108EFS—01
11/30/2007 1:51:45 PM