General Safety Instructions For Power Tools - HTC 2000 Manual Del Operador

Warning:
Any power tool must be bolted securely to stand before use.
Warning:
Read Owners Manual carefully and be completely familiar with the
correct and safe operation of each power tool before use.
Failure to follow these rules may result in serious personal injury.

General Safety Instructions for Power Tools

Using power tools of any kind can be dangerous if safe operating procedures are
not followed. Recognizing the hazards of each tool and using them with respect and
caution will considerably limit the possibility of personal injury. However, if safety
precautions are ignored, personal injury will likely result. Always use common sense –
your personal safety is your responsibility.
1. Know your power tool. Read and understand the Owner's Manual and observe the
warnings and instruction labels affixed to the tool.
2. Properly ground all tools.
3. Keep guards in place.
4. Remove adjusting keys and wrenches.
5. Keep work area clean and dry.
6. Keep children away.
7. Never leave running machines/tools unattended.
8. Disconnect tools from service.
9. Regularly maintain tools.
10. Use correct tools for the job.
11. Never force a tool.
12. Wear safety apparel.
13. Use safety glasses/goggles.
14. Never stand or sit on tools.
15. Replace damaged components immediately.
16. Make sure your work platform is sufficiently sturdy to do the specific job at hand.
17. Use power tools in a well lit area with a level surface on which to stand that is
clean and free from any obstruction.
18. Clamp work piece securely.
19. Properly anchor power tools to work stands.
20. Use correct blade for job being done.
21. Think Safety. Safety is a combination of operator awareness, common sense and
alertness at all times.
3