Loop Output; Microphone Input; Phantom Power Input; Mic Input - Leviton 41920-A01 Manual De Instrucciones

Mixing Audio Amplifier

4.1.4. Loop Output

Variable line level output. Output level changes with the line volume control.

4.2. Microphone input

The microphone input has three modes, and different modes use different
connections:
MIC
48V LINE
4.2.1. 48V phantom power input
With the switch set to "48V", the microphone input will provide a 48V phantom power.
This is typically used with condenser microphones.
Connect as follows:
"+" connects to positive, "-" connects to negative and "╧" connects to ground.
Note: Use with condenser microphones only.

4.2.2. MIC input

With the switch set to "MIC", the microphone input is used to connect dynamic
microphones.
Connect as follows:
"+" connects to positive, "-" connects to negative and "╧" connects to ground.

4.2.3. LINE input

With the switch set to "LINE", the microphone input is used to connect with line level
audio or a wireless microphone output.
Connect as follows:
"+" connects to positive, "-" connects to negative and "╧" connects to ground.
www.leviton.com DI-040-41920-25A
5