Troubleshooting; Replacement Parts - ECCOTEMP ECCOFLO ECP12V Manual De Uso Y Cuidado

Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483

TROUBLESHOOTING

Vibration induced by sea conditions or transporting can cause plumbing or pump hardware
to loosen. Check for system components that are loose. Many symptoms can be resolved by
simply tightening the hardware. Check the following items along with other particulars of your
system. For more help with troubleshooting and installation please visit support.eccotemp.com.
Failure to prime – motor
operates, but no pump
discharge
Motor fails to turn on
Pulsating flow
Pump fails to turn off after
all fixtures are closed.
Low flow and pressure

REPLACEMENT PARTS

To order please visit www.eccotemp.com or call 1-866-356-1992.
10ECF
½" Barbed ½"- Barbed
Adapter Adapter
Support: Eccotemp.com/help-desk
• Restricted intake or discharge line.
• Air leak in intake line
• Debris in pump
• Punctured pump diaphragm (pump leaks)
• Crack in pump housing
• Loose wiring connection
• Pump circuit has no power
• Blown fuse
• Pressure switch failure
• Defective motor
• Restricted pump delivery. Check discharge lines,
fittings and valves for clogging or under sizing.
• Empty water tank
• Insufficient voltage to pump (low battery)
• Punctured pump diaphragm (pump leaks)
• Discharge line leak
• Defective pressure switch
• Air leak at pump intake
• Accumulation of debris inside pump and plumbing
• Worn pump bearing (excessive noise)
• Punctured pump diaphragm (pump leaks)
• Defective motor
20ECF 30ECF
½" Threaded
Adapters
Shop Online: Eccotemp.com/products
40ECF
Sediment Strainer
Store Locator: Eccotemp.com/locator
50ECF
Red/Black (+/-)
clips
7