Introduction - Vertix Raptor-i Manual De Instrucciones

INTRODUCTION

EN
The VERTIX™ Raptor series is a wireless 2.4GHz system designed for easy retrofit on helmets. It allows you to conveniently access audio
entertainment, navigation information and communications when wearing your helmet. The Raptor-i works with most mobile phones, GPS
®
navigation devices and music players equipped with Bluetooth technology.
Your Raptor-i is designed with a high quality rubberized double injection molded outer membrane capable of withstanding weather conditions
you are accustomed to while riding or may encounter on longer journeys; such as heavy rain, hot and cold temperatures. The Raptor-i is
aerodynamically designed and when properly installed will minimize turbulence and drag at high speeds, reducing disturbances and discomfort to
the rider.
The Raptor-i comes with your choice of a boom or wired microphone headset with specially tuned speakers to deliver high quality audio for your
music and communications experience. With the Raptor-i's Cut-the-Noise™ Digital Signal Processing (DSP) and Automatic Volume Control (AVC)
technologies, you are assured of communications quality which allows you to be heard clearly by the other party. Your Raptor-i will work through
20dB NRR earplugs to ensure you can hear clearly while protecting your ears against very loud wind-noise levels at high speeds. As the wind-
noise level depends on the helmet design, type and brand, the maximum speed which you can comfortably communicate will vary. As there are 4
different independent volume settings for the Raptor-i, the volume settings will default to the 50% level everytime you Power ON the unit after a
FULL Power OFF.
The Raptor-i's controls are carefully researched, designed and tested for easy feel and operation with riding gloves. To further improve ease of use,
a handle mounted, ergonomically-designed remote control unit will soon be available to complement your Remote-Ready Raptor-i.
3