Utilitech UT40C Manual De Instrucciones página 8

INSTALLATION INSTRUCTIONS
7 . Drill mounting holes in concrete:
a . Position the mounting arm (A) on the wall and
use a level to ensure that the mounting arm (A)
is level . Mark the two mounting locations with a
pencil .
b . Use a 5/16 in . (8 mm) drill bit to drill two pilot
holes 2-3/4 in . (70 mm) deep into the wall .
c . Insert wall anchors (FF) into the pilot holes .
Hardware Used
FF
Wall Anchor
8 . Attach the wall mount (A) to the wall using the wall
screws (EE) . Ensure that the UP symbol and arrow
are pointing up and securely tighten the wood screws
(EE) using a Phillips screwdriver and/or 8 mm socket
wrench .
Hardware Used
Wall Screw
EE
9 . Slide the monitor plate (B) down onto the end of
the mounting arm (A) and secure by reinstalling the
mounting arm screw (KK) . Do not overtighten .
Hardware Used
Mounting Arm Screw
KK
FF
x 2
EE
x 2
KK
x 1
8
7
A
FF
8
A
9
A
Lowes.com
EE
B
KK