Answering An Incoming Call; Ending A Call; Rejecting An Incoming Call - Hama Titan Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Note: Your handset's model and settings determine whether there is keypad tone or not.
Adjust volume during your call through the volume adjustment keys of Hama Titan.

2.6 Answering an Incoming Call

Before using Hama Titan to answer an incoming call, make sure that the Hama Titan is con-
nected to your handset or that your handset has stored the pairing information of Hama Titan
and these two devices are within effective distance. When there is an incoming call, the ring
tone is heard from both Hama Titan and your handset, and blue light blinks quickly. Press the
multi-function button to answer the phone. If "automatic answer" function is set on your
handset, Hama Titan will automatically answer the call without the need of pressing the
multi-function button on Hama Titan. If Hama Titan is off when there is an incoming call, long
press the multi-function button to turn it on, and then short press it to answer the call.
Note 1: Some brands of handsets don't ring, instead, Hama Titan rings when there is an inco-
ming call. Simply press the multi-function button to answer the call.
Note 2: Some brands of handsets (e.g., Sony Ericsson P800) ring, but Hama Titan doesn't ring
when there is an incoming call. Please short press the multi-function button of Hama Titan to
answer the call when the handset rings.

2.7 Ending a Call

When using Hama Titan, you can end a call in any of these ways:
Short press the multi-function button on Hama Titan;
Press the end call key on your handset;
The call will end automatically when the party you're talking to hangs up the call.
2.8 Mute
1. Under call mode, press and hold the mute key until you hear an inflection. The micropho-
ne will be in mute mode, and the other side will not be able to hear your voice. In such a
state, you may hear "toots" at regular intervals.
2. Under mute mode, press the mute key to bring the microphone from mute mode back to
the normal mode.
Note: When using the headset alone, you may achieve this function by pressing volume
increase and volume decrease keys at the same time.

2.9 Rejecting an Incoming Call

When using Hama Titan, you can reject a call in any of these ways: Long press the multi-
15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

16310

Tabla de contenido