4
3. Insert four 30 mm Wood Dowels (3) into the inner holes on one Small Drawer Back Panel (O) as a
guide. Tap it in with a rubber mallet, if necessary. Make sure that you use a small amount of glue with
both ends of all dowels.
NOTE: It is very important to use a small amount of glue on both ends of dowels.
4. Align the drilled holes on the Small Drawer Left and Right Side Panels (M and N) with the inserted
Wood Dowels (3) on the Small Drawer Back Panel (O), and then press them together. Fasten the Small
Drawer Side Panels (M and N) in place with four 38 mm Screws (4).
Assembly Instructions
N
3
M8 x 30 mm Wood Dowel
(4 used in this step)
O
M4 x 38 mm Screw
(4 used in this step)
③
8
M
3
x2
④
4