Filling Unit; Solution Transfer - Orbio 100-Tb Manual De Funcionamiento Y Lista De Componentes

FILLING UNIT

FOR SAFETY: Always stop the machine on a
flat level surface and engage the wheel lock
before dispensing cleaning solution.
1. Bring the machine to the Orbio Multi−Surface
Cleaner generator. Engage wheel lock.
2. Lift open tank lid.
3. Fill unit from the Orbio Multi−Surface Cleaner
generator.
100−Tb/200−Tb DM20016 (7−2012)
OPERATION EN
4. Close tank lid. Make sure lid is secured.
FOR SAFETY: Wipe up any spills

SOLUTION TRANSFER

1. Wrap the dispensing hose securly around the
handle of the machine.
2. Disengage wheel lock.
3. Move unit to reservoir/tank fill location.
WARNING:
inclines. 2% maximum grade.
Do not push on
9