Getting Started - Blue Pure 211 Manual Del Usuario

USAGE
Getting the most from Blue
Close all windows and doors. Run your Blue 24 hours a day.
With Blue, you get clean air that's free of these potentially harmful
airborne contaminants:
» Dust » Smoke
» Sand » Pet dander
» Mold » Smog (PM2.5)*
» Pollen » Bacteria and viruses
» Soot and ashes
Because your indoor air will constantly be cleaned, it is less likely that
you'll suffer from health effects due to poor room air quality. Think of Blue
as your room air's best friend, and a smart investment in a healthier future.
* Particle matter smaller than 2.5 microns
Placement
Place Blue in an upright position on the floor in your room. Choose a
location where air can circulate freely into, out of and around the unit.
The minimum recommended distance to any adjacent object is 10 cm
or 4". Be sure to place the unit where it won't be knocked over by
anyone or any pet in the household.
Do not place the unit:
» Directly on or against soft furnishings such as bedding or curtains.
» Near sources of heat, such as radiators, fireplaces, stoves or ovens.
» Near wet areas, such as bathrooms, laundry rooms or where it may
otherwise come into contact with water.
» Outdoors.
20

Getting started

1
Gently press the buttons on both
sides of the unit.
2
Remove the top portion of
the unit.
3
Then attach the fabric pre-filter.
To ensure a smooth fit, position the
markings on the fabric directly on
the upper corners of the main filter.
SETUP
4
Next, reposition the top of the unit
onto the bottom and make sure it
clicks into place.
5
Plug in your Blue air purifier.
6
Touch the button to turn it on.
It automatically sets itself to the
recommended energy-efficient
operating speed.
You are ready, breathe freely!
21