General Notes - Indel Webasto Marine isotherm VE150 Instrucciones Para La Instalación Y El Uso

VE150 Cooling Unit
START-UP
Test the operation of the unit by turning the thermostat knob in a clockwise direction. The compressor
must start up within a few seconds. Check that the condenser cooling fan and the evaporator unit
distribution fan work correctly. A few minutes after start-up, the evaporator unit will begin to cool
down, producing cold air from the bottom.
The temperature can be adjusted using the control dial, with a scale with values ranging from 0 to 7,
where 7 is the maximum cold production value and 0 is the stop/off value.
MAINTENANCE
The complete cooling unit can remain on the boat during the winter. To ensure it remains efficient,
periodically remove any dust that accumulates on the condenser.

GENERAL NOTES

The cooling unit is built to cool boxes/compartments designed for storing food. Improper use or any
other use is considered dangerous and the manufacturer disclaims any liability for damage or injury.
Packaging: The packaging and the unit must be disposed of in accordance with applicable
environmental laws in the place of use. Ensure that the product is disposed of properly.
The foods inserted in the cooled box/compartment must be kept in containers suitable for use with
food or in the original packaging.
19