To contact Bose Professional or to find a dealer or distributor near you, visit PRO.BOSE.COM. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of Read these instructions.
Para comunicarse con Bose Professional o para encontrar un distribuidor cerca de usted, visite NOTA: Este equipo ha sido sometido a pruebas y se ha comprobado que cumple con los límites de un dispositivo digital Clase PRO.BOSE.COM.
REMARQUE : Ce matériel a fait l’objet de tests prouvant sa conformité aux limites imposées aux appareils numériques de installateurs, techniciens, revendeurs ou distributeurs agréés. Pour contacter Bose Professional ou pour trouver un revendeur classe A, conformément à la partie 15 des réglementations de la FCC. Ces limites sont conçues pour offrir une protection ou un distributeur près de chez vous, rendez-vous à...
HINWEIS: Dieses Gerät wurde geprüft. Es stimmt mit den Regelungen für Geräte der Klasse A gemäß Teil 15 der FCC- autorisierten Servicepartnern, Monteuren, Technikern, Händlern oder Vertreibern durchführen. Die Bose Professional Vorschriften überein. Diese Grenzwerte sollen einen angemessenen Schutz gegen elektromagnetische Störungen beim Kontaktdaten für Ihr Land sowie Informationen zu Händlern oder Vertreibern in Ihrer Nähe finden Sie auf PRO.BOSE.COM.
Página 6
Per contattare Bose Professional o per trovare il rivenditore o NOTA: Questa apparecchiatura è stata sottoposta a collaudo ed è risultata conforme ai limiti relativi ai dispositivi digitali di distributore più...
Om contact op te nemen met Bose Professional en voor informatie over de OPMERKING: Dit apparaat is getest en voldoet aan de limieten voor een digitaal apparaat van de klasse A, volgens deel 15 van dichtstbijzijnde dealer of distributeur, gaat u naar PRO.BOSE.COM.
Overview PRO.BOSE.COM Package Contents Your Bose CSP includes the following accessories, depending on the model: CSP-428 or CSP-1248: Accessories CSP-428 CSP-1248 AC power cord Cable ties 2-pin Euroblock (orange) 2-pin Euroblock (black) 3-pin Euroblock (green) 4-pin Euroblock (green) 6-pin Euroblock (orange)
Overview PRO.BOSE.COM Available Accessories The CSP-428 and CSP-1248 are compatible with Bose ControlCenter digital zone controllers and the AVM-1 sense microphone. Below is a list of compatible devices: Model Part Number Notes ControlSpace ControlCenter CC-1D PC 079059 (US, white) Uses Network port. Requires additional Power-over-Ethernet (PoE) switch.
Red: Clipping (–2 dBFS to 0 dBFS) Ethernet: Connection status indication of Green: Ethernet link established Ethernet ports. Yellow: Active transmission/reception AmpLink: Connection status indication of Green: AmpLink is active AmpLink-equipped amplifiers. 12 • English CSP-428/1248 • Installation Guide...
Network port: Ethernet network connection for up to 16 ControlCenter digital zone controllers via a PoE switch. See Installation > Network Connection (page 17) for more information. Power input: Power cord connection (IEC 60320-C14 inlet). See Installation > Power Connection (page 17) for more information. Installation Guide • CSP-428/1248 English • 13...
(1 RU) in height and requiring a mounting depth of 208 millimeters (8.2 inches) from the front rack rail. Use four fasteners with washers (not included) to mount the CSP. The CSP-428 and CSP-1248 use active side ventilation and can safely operate in ambient conditions from 0 °C to 40 °C (32 °F to 104 °F).
See Overview > Available Accessories (page 11) for a list of compatible accessories. Mute with Standard Contact Closure The CSP-428 and CSP-1248 are designed to mute all outputs either when the Mute contacts are either shorted together or opened, depending on how the CSP is configured.
Use proper precautions when driving inductive loads. Sink Limits: 100 mA (maximum). External supplies must be ≤ 24 VDC. Example: Control output connections for a current sink 16 • English CSP-428/1248 • Installation Guide...
Installation PRO.BOSE.COM Network Connection The CSP-428 and CSP-1248 include a Network port on the rear panel for network connection. Use a foiled or unshielded twisted-pair (F/UTP) Cat 5e cable (not included) to connect this port on each CSP to your network or computer.
Interrupting the connection can damage the firmware on the CSP. Battery Replacement The CSP-428 and CSP-1248 each contain a replaceable lithium battery for maintaining the real-time clock (RTC) capability of the system. This battery lasts at least 10 years from the time of production and rarely requires replacement.
The Power LED is red. Disconnect the power cord from the power outlet, and then reconnect it. If the issue continues, call your Bose Professional sales/support representative. The Ethernet LED is off. Make sure that the processor's Network port is securely connected to a computer, hub, or switch using a foiled or unshielded twisted-pair (F/UTP) Cat 5e cable (not included).
Output Voltage High: 8 V (open circuit), 2.5 V at 10 mA, Low: < 1 V at 100 mA, push-pull Output Current 10 mA source, 100 mA sink (24 VDC max external supply voltage) 20 • English CSP-428/1248 • Installation Guide...
Página 21
Active, side venting with fan Storage Temperature –40 °C to 70 °C (–40 °F to 158 °F) Humidity 80% (without condensation) General Configuration Software Integrated web server with configuration utility Network Control Ethernet (RJ-45), 10/100MBase-T Installation Guide • CSP-428/1248 English • 21...
10 mA source, 100 mA sink (24 VDC max external supply voltage) Indicators and Controls LED Status Indicators Power/Status, Signal, Ethernet, AmpLink Audio Signal Indication Green (–60 to –20 dBFS), yellow (–20 to –2 dBFS), red (–2 dBFS to Clip) 22 • English CSP-428/1248 • Installation Guide...
Página 23
Active, side venting with fan Storage Temperature –40 °C to 70 °C (–40 °F to 158 °F) Humidity 80% (without condensation) General Configuration Software Integrated web server with configuration utility Network Control Ethernet (RJ-45), 10/100MBase-T Installation Guide • CSP-428/1248 English • 23...