Corsair Gaming Audio Serie Manual Del Usuario página 7

Using the desktop controller
About the controller
The desktop controller is used to adjust volume, select
the input source (your PC, or one of the two auxiliary
connectors), and select EQ and program settings
(more on this later). There are four controls:
1. POWER: toggles the power.
2. MENU: displays the main menu.
3. VOLUME: displays the master volume control.
4. SUBWOOFER: displays the subwoofer output.
5. CONTROL DIAL: allows you to scroll through
menus and menu selections, adjust master volume,
and subwoofer output.
The desktop controller will automatically switch to the
volume screen after a short period of inactivity.
3 2 4
First-time use: selecting the display language
The first time you turn on the SP2500, the desktop
controller will display the setup menu. The first option
in the setup menu allows you to choose your display
language. Rotate the dial to highlight language,
click the wheel to select the language menu, and
then rotate the wheel to scroll through the language
choices. Click the wheel again to select your
preferred language.
You can change the language at any time by returning
to the setup menu. Press the MENU button, scrolling
to highlight setup menu, and click the wheel.
Selecting an audio source
If the screen is not displaying the main menu, press
MENU to activate it. Rotate the dial to highlight input,
and then press the dial. Rotate the dial again to scroll
1
through the input options, and then press the dial
again to select your source:
5
LINE IN: the stereo RCA inputs on the back of the
subwoofer.
AUX1: the 3.5mm stereo input located on the
subwoofer.
AUX2: the 3.5mm stereo input located on the desktop
controller.
Adjusting volume and subwoofer output
The master volume controls the output of both the
satellites and the subwoofer.
To adjust the master volume, press the VOLUME
button. The master volume screen will appear. Rotate
the dial to adjust the volume. Press the dial to mute
the audio.
To adjust subwoofer output on its own, press the
SUBWOOFER button to display the subwoofer output
screen. Rotate the dial to adjust the volume, and press
the dial to mute the subwoofer.
Using the setup menu
The setup menu contains options that you probably
won't be setting every day:
backlight: adjusts the length of time before the
backlight fades after you've used the controller.
color: allows you to toggle between the Day and Night
interface color schemes.
Selecting a program or EQ mode
Programs and EQ modes are selected from the main
menu. Press the MENU button, if necessary, to display
the main menu, scroll to program or EQ and press the
dial, and then rotate the dial again to scroll through
the options. Press the dial again to select an option.
Details on each of the programs and EQ settings are
covered on the next page.
5