Additional Safety Warnings - Arbortech PWC.SA.600.60 Manual De Instrucciones

9) ADDITIONAL SAFETY WARNINGS

SPECIFIC FOR SANDING
OPERATIONS:
a. Do not use excessively oversized sanding disc
paper. Follow manufacturers recommendations,
when selecting sanding paper. Larger sanding
paper extending beyond the sanding pad presents
a laceration hazard and may cause snagging,
tearing of the disc or kickback.
b. Adjust the speed as recommended for sanding
applications. High speed sanding presents
laceration and burning hazard.
ADDITIONAL SAFETY
WARNINGS
Wear hearing protection; Wear eye protection; Wear
dust mask; Wear protective gloves.
a. Use suitable detectors to determine if utility
lines are hidden in the work area or call the
local utility company for assistance. Contact
with electric lines can lead to fire and electric
shock. Damaging a gas line can lead to explosion.
Penetrating a water line causes property damage
or may cause an electric shock.
b. Release the On/Off switch and set it to the off
position when the power supply is interrupted,
e. g., in case of a power failure or when the mains
plug is pulled.
c. Do not touch grinding and cutting discs before
they have cooled down. The discs can become
very hot while working.
d. Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure
than by hand.
PRODUCT DESCRIPTION AND
SPECIFICATIONS
Read all safety warnings and all
instructions, Failure to follow the warnings
and instructions may result in electric
shock, fire and/or serious injury.
INTENDED USE
The machine is designed for grinding and sanding
applications. The machine is designed and
constructed for use with attachments supplied by the
manufacturer. The machine can only be used for dry
applications without use of water.
10) CE - DECLARATION OF
CONFORMITY:
Arbortech declares that the product PWC.SA.600.40
and PWC.SA.600.60 described in this manual
under "Technical Specifications" is manufactured in
compliance with EN 60745 standardised documents.
Technical file in conformity with Machinery Directive
2006/42/EC at: Arbortech PTY LTD | 67 Westchester
Road, Malaga, WA 6090
Sven Blicks
General Manager
Voltage
Power Rating
Frequency
Protection Class
Rated Speed
Tool Max. Diameter
Mounting Bore Size
Mounting Thread Size
Weight
Vibration Emission (k=1.5)
Sound Pressure Level
Sound Power Level
WARNING: The declared vibration emission
level represents the main applications of the
tool. However if the tool is used for different
applications, with different accessories or
insertion tools or is poorly maintained, the
vibration emission may differ. This may
significantly increase the exposure level over the
total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool is
switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure
level over the total working period. Identify additional
safety measures to protect the operator from the
effects of vibration.
ASSEMBLY
WARNING: To reduce the risk of serious personal
injury, turn the tool off and disconnect from the
power source before making any adjustments or
removing/installing tools or accessories.
AUXILIARY HANDLE
Screw the handle (2) into one of the side holes on the
head of the grinder as shown in Fig. B. Ensure the
handle is secure before use.
230-240 V
710 W
Hz
50
II II
2 000 – 11 000 rpm
115 mm
22.2 mm
M14 -
2.0 kg
2.6 m/s2
L = 89
dB(A)
PA
K = 3
PA
L = 100
WA
dB(A)
K = 3
WA
English
5