Lenco SPB-260 Manual Del Usuario página 10

10. Bass -
11. MUSIC: Select the MUSIC EQ setting
12. NEWS: Select the NEWS EQ setting
13. MUTE mode.
14. INPUT: Source selection (AUX*2/USB/BT/COAX/OPT)
15. RESET: Reset all sound settings to factory defaults. (Press and hold
button for 2 seconds.)
16. Stop button: Press to stop. (Only works in USB mode).
17. Next button: Play next song. (Only work in USB and BT mode).
18. +10: Forwards ten songs. (Only works in USB mode).
19. Treble +.
20. Bass +
21. MOVIE: Select the MOVIE EQ setting
22. 3D: Select the 3D EQ setting.
23. Play/Pause (Only works in USB and BT mode).
SET UP
Connect the RIGHT speaker to the "OUT TO RIGHT SPEAKER" marked
connection on the LEFT speaker.
Then plug in the power cord of the LEFT speaker to an AC outlet.
Right speaker
Powering the unit on/off
After plugging in the power cord, the LED indicator will light up in RED,
indicating the unit is in standby mode. If the unit will not be used for a longer
period, unplug the power cord from the wall outlet.
Left speaker
10