1. Battery Level Display
: indicates the battery level of the image transmitter.
100
100
100
2. System Settings
: tap to set the parameters.
RavenEye Assistant: tap to enable the display of RavenEye Assistant.
Guide Frame: tap to choose from 3 x 3, 6 x 4, or Golden Ratio.
Aspect Marker: tap to choose from 2.35:1, 1.82:1, 16:9, 9:16, or 4:3.
Safety Zone Marker: tap to choose from 96%, 93%, 90%, 88%, 85%, or 80%.
Focus Peaking Threshold: tap to adjust the focus accuracy. The smaller the value, the larger the detected edge.
Center Marker: tap to choose from Center Point, Diagonals, or Center Point+Diagonals.
Marker Color: tap to choose from red, green, blue, white, or black.
Marker Width: tap to choose the marker width.
Shutter: tap to set the function of the shutter button. Select Shoot to set the shutter button to start shooting,
Cache to start caching, or Shooting Plus Cache to start shooting and caching simultaneously.
Max Cache: tap to choose from 1 GB, 2 GB, 4 GB, 8 GB, and none.
Wi-Fi Settings: tap to set the Wi-Fi name, password, frequency, and channel. Reconnect the Wi-Fi if the Wi-Fi
name or password are changed.
About: tap to view the serial number and the firmware version of RavenEye.
3. Shooting Mode
: tap to switch between photo or video mode.
4. Shutter/Record Button
: tap to take a photo or start or stop recording.
5. Playback
: tap to view photos and videos.
6
9
8
F 2.8
F 2.8
1/800
1/800
800
800
7
6
1
2
100
100
3
4
02:30
02:30
5