At The Controller; Menu Navigation; Adding The Device - Toro EVOLUTION Serie Manual Del Usario

At the Controller

Menu Navigation

• Use or to navigate the menu commands.
• To change a value, press
field, then press and
SELECT to input the desired value.
• Press

Adding the Device

For the EVOLUTION® Series controller and remote to
successfully communicate, identical PINs must be set in both
the controller and remote.
At the controller:
ADVANCED then
1. Press
to ADD/REMOVE DEVICE. Press
2. Press
ADVANCED
ZONE DETAILS
SCHEDULE STARTS
SCHEDULE DETAILS
SENSORS
ADD/REMOVE DEVICE
4
or to move to the desired
to adjust the value.
.
.
3. Press to REMOTE .
ADD/REMOVE DEVICE
WEATHER
*
SOIL 1
SOIL 2
SOIL 3
REMOTE
4. Press to enter the PIN field of the remote.
Press or to change the value.
Use or to move between the numeric fields.
5. Press to input the desired value.
6. Press to return to the home screen.
* The WEATHER sensor is not available for the Australia
region.
ADD
ADD
ADD
ADD
14
98