Low Battery; Answering A Call / Ending A Call; Last Number Redial; Making A Call - LG Electronics HBM-810 Manual Del Usuario

How to use

Low battery

- An announcement will be made once every 2 minutes.
(Speech:Battery very low, please charge now)
- If the battery is not charged, the headset will turn off.

Answering a call / Ending a call

- Briefly press the CALL button.

Last number redial*

- Press and hold the CALL button for 1 second to activate "Last Number Redial".

Making a call

- If you make a call from the handset, the call will (subject to phone settings) automatically
transfer to the headset. If the call is not automatically transferred, you can manually transfer
the call by briefly pressing the CALL button on the headset/cradle. (Headset and handset
must be paired).

Voice dialing*

- Briefly press the CALL button to activate "Voice Command".
NOTE: If the handset does not support Voice Dialing, it is possible that performing this action
will activate Last Number Redial.

Transferring a call*

- While on a call on your handset, briefly press the CALL button on the headset to transfer the
audio to the headset. And to transfer a call from the headset to handset, press and hold
VOLUME UP button for 3 seconds.

Call waiting*

- Answer a second call without hanging up the first call by pressing the CALL button for
1 second (you will hear a beep). Press the CALL button for 1second to return to the
original call.
- Briefly press the CALL button to terminate the active call or both calls at once. (subject
to handset's support)

Call Reject*

- Press the CALL button for 1second when the handset rings.
* Calling instructions apply to the headset AND the cradle (when the headset is attached).
8
Using HBM-810 as a Hands Free Car Kit
- To use the HBM-810 as a Hands Free Car Kit, attach the headset to the Cradle.
- When the headset is attached to the Hands-free Car Kit, the headset CALL button is
deactivated, and will not work.
- Once the headset is attached to the cradle, all audio will be played through the cradle.
Auto reconnect
- If the HBM-810 is turned off (either accidentally or intentionally) while connected to a
handset, the headset and handset will disconnect.The headset and handset will
automatically reconnect when the HBM-810 is turned back on (provided that both
devices are within the required range of 33 feet 10 meters).
[ Out of range ]
- When your handset and HBM-810 are separated by a range of 33 feet (10 meters) or
more, the headset and handset will disconnect. When the handset and HBM-810 are
within the required range again, the HBM-810 will automatically reconnect to the
handset.
- If the headset and handset do not automatically reconnect when they are back within the
required range, briefly press the Call button on the HBM-810 to reconnect manually.

Music Play (A2DP)

The HBM-810 supports music streaming (A2DP).
When you play music from your mobile phone it will automatically transfer to your headset
or cradle. Music will automatically pause when you have an incoming call. When the call is
ended the music will start playing again.
Controlling your music is only possible from your handset.
How to use
9