Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
"Charging the battery").
o Make sure the Micro SD memory card is inserted in the device when connecting
to your computer. If the Micro SD memory card is not inserted when connecting, the
device will not appear in the list of connected devices on your computer.
1
You can also remove the Micro SD Card from the Micro SD card slot
of the
device and insert it into the Micro SD Card slot of your computer.
Flash light Illumination
8
Press the POWER button
to switch on the device. Press the POWER button
8
once more to switch on the flash light LEDs
to make pictures or videos in the dark.
6
Window mount
Connect the Window suction cup to the connection point
of the device by sliding
14
the connections together until they click in place.
Now place the suction cup on the inside of your car's front windshield near the rear
mirror.
Press the lever down to enable the suction cup to stick to the window.
Reset button
In case the device does not function as it should or freezes, you can press the reset
button
to resume normal operation.
14
EN 08
Publicidad
Tabla de contenido
