Helpful Tips; Cleaning & Maintenance - Nostalgia Products SC7 Serie Instrucciones Y Recetas

HELPFUL TIPS

ICE CUBES
For best results, ice cubes should sit outside of the freezer a short while
before putting them into the Ice Shaving Compartment. If ice has a frosty
appearance, it is too hard to shave. Let ice sit until it is translucent and wet
to the touch. Then it is ready to put in the Ice Shaving Compartment.
SHAVED ICE
To prevent messes:
• Place unit on a waterproof surface while in use.
• After you are finished making snow cones, make sure to empty
the Ice Shaving Compartment and Drip Tray.
CLEANING & MAINTENANCE
To prolong the life of your SNOW CONE PARTY STATION, make
sure to clean and dry the unit after each use.
1. Make sure the unit is unplugged before cleaning.
2. Disassemble unit by removing the Ice Shaving Compartment
Lid, Shaved Ice Bin and Drip Tray.
3. Wash the Ice Shaving Compartment Lid, Shaved Ice Bin and Drip Tray by hand
with warm, soapy water. Rinse and dry thoroughly with a non-abrasive cloth.
4. Wipe down the inside of the Main Unit with a dry, non-abrasive cloth.
CAUTION! The blade is very sharp. Use EXTREME CAUTION when handling the
appliance during cleaning.
5. To prolong the life of your SNOW CONE PARTY STATION, hand-washing
parts is advised. Dishwasher cleaning use is not recommended.
7