Disconnecting A Bluetooth Device; Playback From The Auxiliary Input - Bauhn PS078 Manual Del Usuario

Disconnecting a Bluetooth device

When the Bluetooth pairing is done, you will hear a signal sound from the
speaker. The Bluetooth pairing button will remain lit with a blue light.
The speaker remembers your paired devices. Once the speaker is switched on, it
automatically connects with your last paired device.
3. Start and control the playback on your music device.
4. Rotate the master volume control
To connect to another music device, disconnect first the currently paired device
from the speaker and repeat step 2 above. See the chapter "Disconnecting a
Bluetooth device."
5. Press the on/off button to turn the speaker off when not in use.
Disconnecting a Bluetooth device
In case you want to disconnect a paired Bluetooth device from the speaker, press and
hold the Bluetooth pairing button
light of the Bluetooth pairing button will flash and a signal sound will be heard when
the device is disconnected.

Playback from the auxiliary input

You can also connect your music device to the speaker through an audio cable
(3.5 mm, not provided).
1. Press the on/off button
2. Connect your music device with the auxiliary input jack
an audio cable.
3. Start and control the playback on your music device.
4. Rotate the master volume control
5. When the playback is done, remove the audio cable from the auxiliary input jack.
6. Press the on/off button to turn the speaker off when not in use.
Note: The Bluetooth paring button
device is connected to the speaker through an audio cable. This is a necessary
feature to play or mix music from two different sources as described in the chapter
"Mixing musical inputs."
6
All manuals and user guides at all-guides.com
to adjust the volume of the speaker.
4
8 while the device is being connected. The blue
9 to turn the speaker on.
4 to adjust the volume of the speaker.
8 will keep flashing even though your music
5 of the speaker using