Directions For Use; Routine Cleaning - Germ Guardian TS3000 Manual De Instrucciones

TS3000REV1007:Layout 1 10/18/07

DIRECTIONS FOR USE

1 Rinse manual, electronic or battery operated toothbrush head and shake excess water.
2 Open door and place toothbrush into basket in sanitizing chamber. (Fig. 7)
3 Secure chamber. (Fig. 8)
4 Press on button - dry heat kills germs in 45 minutes without the use of chemicals. (Fig. 9)
5 Toothbrush Sanitizer automatically shuts off when cycle is complete.
NOTE: You may terminate the sanitizing cycle at any time by pressing and releasing the on/off
button. Toothbrushes must be subjected to the complete 45 minute cycle to be sanitized.
IN ORDER FOR GERMS TO BE KILLED OR RENDERED INOPERATIVE, IT IS EXTREMELY IMPORTANT
THAT ITEMS PLACED IN THE SANITIZING CHAMBER BE FREE OF FOREIGN MATTER.
Fig. 7

ROUTINE CLEANING

To maximize the effectiveness of the Germ Guardian™ Toothbrush Sanitizer, we recommend
occasionally washing the sanitizing chamber and basket. Remove the sanitizing chamber and basket
from the base and wash with warm water and mild detergent. Allow to dry completely before replac-
ing them. Both pieces are dishwasher safe.
E-4
3:15 PM Page 3
Fig. 8 Fig. 9
IMPORTANT SAFETY INSTRUCTIONS
To order a replacement bulb LB3000 call 1-866-603-5900 or order online at www.germguardian.com.
Lighted lamp is HOT:
WARNING - To reduce the risk of FIRE, ELECTRIC SHOCK, EXPOSURE TO EXCESSIVE
UV RADIATION, OR INJURY TO PERSONS:
1 Turn off/unplug and allow to cool before replacing bulb.
2 Bulb gets HOT quickly! Only contact switch/plug when turning on.
3 Do not touch hot bulb cover.
4 Do not remain in light if skin feels warm.
5 Do not look directly at lighted lamp.
6 Keep lamp away from materials that may burn.
7 Use only with a Germ Guardian 15 watt, 120 V, T469 Tungsten Halogen Bulb.
8 Do not touch the bulb at any time. Use a soft cloth. Oil from skin may damage bulb.
9 Do not operate the product with a missing or damaged bulb guard.
BULB CHANGE
1 Unplug unit and let cool down.
2 Twist and remove bulb cover. (Fig. 10)
3 Pull out bulb. (Fig. 11)
4 Replace with new bulb #LB3000. (Fig. 12)
5 Replace bulb cover. (Fig. 13)
Fig. 10 Fig. 11
Fig. 12
Fig. 13
E-5