Features And Controls; Know Your Pressure Washer - Snapper 580.752640 Manual Del Operador

Ocultar thumbs Ver también para 580.752640:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

KNOW YOUR PRESSURE WASHER

Read the Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
A - Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
B - High Pressure Hose — Connect one end to water pump
and the other end to spray gun.
C - Cleaning Tank – Use to hold up to two gallons (7.6 l) of
pressure washer safe detergent.
D - Choke Lever — Prepares a cold engine for starting.
E - Fuel Valve — Used to turn fuel supply on and off to
engine.
F - Air Filter — Protects engine by filtering dust and debris
out of intake air.
G - Recoil Starter — Used for starting the engine manually.
H - Standard Detergent Siphoning Tube/Filter — Use to
siphon pressure washer safe detergents into the low
pressure stream.
J - PrecisionSpray™ Selector — Contains six different
setting for various applications.
K - Throttle Lever — Sets engine in starting mode for recoil
starter and stops a running engine.

FEATURES AND CONTROLS

L - Water Inlet — Connection for garden hose.
M - Oil Drain — Drain engine oil here.
N - High Pressure Outlet — Connection for high pressure
P - Automatic Cool Down System — Cycles water through
R - Pump — Develops high pressure.
S - Fuel Tank — Fill tank with regular unleaded fuel. Always
Items Not Shown:
Identification Label (near rear of base plate) — Provides
model and serial number of pressure washer. Please have
these readily available if calling for assistance.
Oil Fill — Check and add engine oil here.
Warning/Operating Instructions Tag — Identifies hazards
and proper procedure to start/stop pressure washer.
6
hose.
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
leave room for fuel expansion.
S
R
P
N
M
L
K
J
H

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido