Gb 1. Regarding The Instructions; Content Of The Instructions; Used Symbols; For Whom Is This Manual Intended - BRÖTJE CISP C Montaje / Ajuste

Regarding the instructions
GB
1. Regarding the instructions
1.1

Content of the instructions

1.2

Used symbols

1.3

For whom is this manual intended?

1.4

Application

14
Please read the instructions thoroughly before any modifications
are made.
To allow the heating engineer to correctly set the CISP C for a 0-
10V input.
Danger! Danger exists for body and life in case it is not observed.
Danger of electric shock! In case it is not observed, danger from
electricity exists for body and life!
Attention! If warning is not observed, danger exists for environ-
ment and the device.
Note/tip: Here, you can find background information and useful
tips.
Reference to additional information in other documents.
This installation manual is intended for the heating specialist.
The voltage signal/relay module CISP C is designed for the input
and output signals of the main control unit.
The CISP C has an additional input signal (Programme no. 5973) and
max. 3 relay outputs (Programme no. 5922 to 5924).
For function expansion up to 2 modules (e.g. CIB, CIM, CIR,
etc.)can be installed into the control unit.
With this, the additional functions, listed in table 1, are possible.
AUGUST BRÖTJE GmbH