AKASO P50 Manual Del Usuario página 15

15. APP SETTING INTERFACE
Click Setting icon on my camera interface to enter APP Setting interface.
Setting
My camera
P50
Online
360°
My camera Album Alert Setting
Message setting: Turn on / off Alert sound when APP is on.
Feedback: when using, if any issues or advice, you can feedback here.
Help: User's Manual for normal setting.
About: Check APP version.
Clear Cache: clean some trace
Modify password: Change the account's password of Phone APP . In Setting interface, click
"Modify password", enter old password and new password to modify.
Account delete: Delete the account of APP .
Logout: Logout the account of Phone APP .
16. SPECIFICATION
Material ABS+PC+ fireproof material
Resolution 1080P (1920*1080)
Image sensor 1/2.7" SC2232 Low Illumination CMOS Sensor
Angle of view 130°(diagonal) / 90°(horizontal)
25
Lens Waterproof Glass Lens
Focal length 3.6mm
Infrared light 6 LED
Night vision distance 8m
Video compression H.264
Day and night mode Automatic switching / IR-CUT
Power supply 5V / 1.2A
Micro SD card Supports 8G-128G capacity MicroSD card
Cloud storage Optional 7 days / 30 days event storage
Working temperature -10°C~+50°C
Working humidity 10%~ 95% non-condensing
TROUBLESHOOTING
Q: Why can't I add a device or fail to configure the network?
A: According to the status of the device indicator, you can determine the cause and
solution of the failure of the network connection.
① Before adding the device, ensure that the device is in red flashing state (2 times in 1
second). If the indicator status is abnormal, please reset the device to factory settings
(press and hold the device RESET button until you hear a beep) (The reset button
position of each product is different, but they are marked with "RESET").
② The device indicator flashes red quickly and does not turn constant green.
a. Device does not support 5GHZ WIFI, please ensure that when adding device, the
phone is connected to 2.4GHZ WiFi.
b. WiFi password must be entered correctly, and there must be no special characters.
c. Note that the current WiFi network is smooth, it is recommended to try to restart the
router.
Q: When adding a device, the APP prompts that the device has been added by the XXXX
account. What should I do?
A: Please reset the product to default and try to connect it again.
26