Channel Search - König Electronic DVB-T HDMI10 Manual De Uso

2.1 Aspect Ratio
Select between 16:9 Pillar Box, 16:9 Pan&Scan, 4:3 Letter Box, 4:3 Pan&Scan, 4:3 Full, 16:9 Wide Screen
and Auto.
2.2 Resolution
Select between 1080i, 1080p, 576i, 576p, 480i and 720p.
2.3 TV Format
Select between PAL and NTSC.
2.4 Video Output
Select between CVBS and RGB.

3. Channel search

This menu consists of 4 major sub-menus as follows:
- Auto Search
- Manual Search
- Country
- Antenna Power
3.1 Auto search
Press the OK key on Auto Search to search channels. For the
first searching, all searched TV channels and Radio channels
will be displayed on the list in order. Through one colour bar at
the bottom of the search window, users can know the searching
progress of the current channel. The TV and Radio Channels
you searched will be shown in the list, you can know the
number of programs at the top of the window. During the
search, you can press the EXIT key to cancel. After searching,
press the EXIT key to return to the normal mode.
3.2 Manual search
Frequency channel: Press key to select the channel.
Frequency: Press the number key to input.
Bandwidth: Press keys to select between 6, 7 and
8M.
Through two colour bars at the bottom of the search window,
users can see the signal quality and strength of the current
channel.
After setting, press the OK key to enter the searching window.
3.3 Country
Press key to select the country.
3.4 Antenna power
Select On or Off.
15