Twin-Star International 26MM9313 Manual De Instrucciones Adjunto página 6

4. Lay Completed Assembly stand on the bottom, put
down Connection Iron (M) to the corner and connect
Center Left Panel (C) , Center Right Panel (D), Front
Frame (A) and Back Frame (B).
5. Attach Magnet (FF) to the Front Frame (A), using
Bolt (DD) through the pre-drilled holes and tighten.
Hardware Used
Bolt
DD
5/32 in. x 1/4 in.
Magnet
FF
6. Put Left Base Panel (I) and Right Base Panel (J) on
the bottom of Completed Assembly from step 5.
Fig. 4
M
Fig. 5
x 4
x 2
Fig. 6
5
M
PUT DOWN
PUT DOWN
DD FF
J
I