Midi Setup - Phonic FIREFLY 302 USB Manual Del Usuario

MIDI Setup

Also in the Audio MIDI Setup section, users are
able to adjust the Firefly's MIDI functions by se-
lecting 'MIDI Devices' at the top of the window.
Within the MIDI Devices section, a 'Firefly 302
USB' icon should be present and users can se-
lect it to get the following screen.
Firefly 302 USB Control Panel
As many of the Firefly's features are adjust-
able through the Audio MIDI Setup section,
the Firefly302USB Control Panel serves a few
very specific surfaces. As seen in the image
below, the main page of the software allows
users to view a few important details on the
product, including the driver version, serial
number, etcetera.
Firefly 302 USB
Users can also select one of the two internal
mixers that the Firefly's software offers.
Monitor Mixer
The Monitor Mixer, in essence, allows you to
adjust your Firefly's input signals before send-
ing them off to your DAW software. All of the
inputs are listed; the SPDIF 1 and 0 inputs that
are listed in the software are representative of
the S/PDIF left and right input signals, I2S 3
and 2 are both the microphone input, and the
I2S 1 and 0 channels are analog inputs 1 and
2 on the Firefly 302 USB.
You can opt to adjust your device's input signals
in this mixer, or you can just opt to leave it alone
all together and rely on your DAW software's
level controls.
In case you're wondering why there's only one
microphone input, but two microphone chan-
nels on the Firefly - this function allows you to
make a stereo mix of your microphone signal!
19