peerless-AV PLA50-UNL Manual De Instalación página 13

Depending on the specifi c size & weight of the plasma, articulating swing arm may be angled at different posi-
9
tions, causing plasma to appear to lean sideways at different articulating positions. Tilt-roll assembly (B) allows
plasma to be manually adjusted, so plasma can be horizontal at all positions. To adjust, gently rotate plasma by
hand to desired position.
If it is too diffi cult to adjust roll of plasma, loosen screws shown in fi gure 9.1 using a phillips screwdriver.
9-1
IMPORTANT! Do not loosen or tighten screws more than 1/8 turn.
ARTICULATING
ARM
PLASMA
ROLL
ADJUSTMENT
SCREWS
fi g. 9.1
ISSUED: 06-05-06 SHEET #: 202-9140-12 (2014-03-14)
13 of 41
All other brand and product names are trademarks or registered trademarks of their respective owners.
© 2013, Peerless Industries, Inc. All rights reserved.