Product Description; Installation - ANSMANN WFL800S Traducción Del Manual Original

• Do not repair the product yourself! Have repairs carried out by a
professional electrician.
• The luminary is non-replaceable. The entire product must be replaced
when the luminary reaches the end of its service life.
• Caution! Use a H05RN-F 3G 1 mm
for connection only.

PRODUCT DESCRIPTION

(see page 2)
1 LEDs
2 Set screws
3 Power cord

INSTALLATION

• Interrupt the power supply to the cable at the fuse box and secure it
against reconnection by third parties.
• Select a suitable location for product installation.
Please note:
Other light sources (e.g. lanterns) may impair the sensor's functionality. Do
not install the product in areas directly influenced by other sources of light.
The mounting holes in the bracket have a diameter of 5 mm. Select suitable
mounting materials.
Deutsch |
Svenska | Italiano | Nederlands | Suomi | Norsk | Dansk
2
English | Français | Español | Português
or higher category connection cable
4 Mounting bracket
5 Sensor
17