Linksys Wap300N - Cisco Linksys WAP300N Guia Del Usuario

Linksys WAP300N

Specifications
Linksys WAP300N
Model WAP300N
Description Linksys Wireless-N Access Point
Ethernet Port Speed 10/100 Mbps (Fast Ethernet)
Radio Frequency 2 4 or 5 GHz
Number of Antennas 2
Antenna Type External dipole antenna with R-SMA connector
Detachable Yes
Ports Power, Ethernet
Buttons Reset, Wi-Fi Protected Setup™,
Power (European model only)
LEDs Power, Wi-Fi Protected Setup, Ethernet,
Wireless
Wireless Security Features WEP, Wi-Fi Protected Access™ (WPA),
Wi-Fi Protected Access™ 2 (WPA2),
Wireless MAC Filtering
Security Key Bits Up to 128-bit encryption
Environmental
Dimensions 188 7 × 151 7 × 31 2 mm (7 43" × 5 97" × 1 23")
without external antennas
Unit Weight 207 0 g (7 3 oz), without external antennas
229 6 g (8 1 oz), with external antennas
Power 12V, 0 5A
Certifications FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi
(IEEE 802 11a/b/g/n), WPA2™, WMM®,
Wi-Fi Protected Setup™
Operating Temperature 0 to 40°C (32 to 104°F)
Storage Temperature -20 to 60°C (-4 to 140°F)
Operating Humidity 10 to 80% non-condensing
Storage Humidity 5 to 90% non-condensing
NOTES
For regulatory, warranty, and safety information, see the CD that
came with your device or go to Linksys.com/support
Specifications are subject to change without notice
Maximum performance derived from IEEE Standard 802 11
specifications Actual performance can vary, including lower
wireless network capacity, data throughput rate, range and
coverage Performance depends on many factors, conditions and
variables, including distance from the access point, volume of
network traffic, building materials and construction, operating
system used, mix of wireless products used, interference and other
adverse conditions
Specifications
26 26 26